Professional OEM toothpaste manufacturers are also strict in formulating.

Professional OEM toothpaste manufacturers are also strict in formulating.

Speaking of OEM toothpaste processing, many people are familiar with it, but professional toothpaste manufacturers such as Shanghai qianxie have their own mature formula systems, rather than just producing products for brands.A strict and professional toothpaste manufacturer must be very strict when developing their own formula.As we all know, OEM toothpaste manufacturing mainly consists of auxiliary ingredients such as humectants, abrasives, foaming agents, adhesives and flavors.1. Humectants mainly play the role of moisture retention and antifreeze in toothpaste, and also perform shaping and antibacterial functions.Generally speaking, the concentration of humectants should be more than 25% to maintain the freezing point of the paste at - 8. It has good moisturizing properties and its own antibacterial ability.As the amount of moisturizer increases, the appearance of the paste becomes brighter and denser.If the moisturizer has poor frost resistance, water solubility and moisturizing properties, the stability of the paste will be poor;Humectants commonly used in OEM toothpaste production include sorbitol, glycerin, etc. 2. Abrasives mainly play the role of friction and disinfection in toothpaste, usually about 50%. When toothpaste is produced by OEM, increasing the amount of abrasives can usually increase the proportion of paste and at the same time reduce the amount of water.In the formula, the viscosity of the paste increases and the amount of CMC can be reduced accordingly.Besides.The specific gravity of the paste increases and the paste becomes dense.However, the volume occupied by the paste in the hose is also reduced;By adjusting the amount of abrasive, there is usually no significant difference in taste, but if too much is used, tooth wear will increase and friction may be reduced.adjusted by calculating interest.If the amount of calcium carbonate in a toothpaste formula is 50% and its water absorption is calculated as 4.4ml/20g, the moisture content of the toothpaste must be kept above 11%, otherwise the toothpaste will not be able to form due to insufficient moisture. Generally, toothpaste is produced OEM.Moisture content is about 25%.3. Foaming agent in toothpaste mainly plays the role of foaming, washing, disinfecting and emulsifying flavors.The foaming agent used in OEM toothpaste processing is typically sodium fatty alcohol sulfate and is dosed between 2 and 8%.It is recommended to reduce the amount of foaming agent. The dosage of foaming agent can improve the taste, reduce irritation of the oral mucosa and facilitate the dispersion of the essence and flavor in the toothpaste, improving the taste of the toothpaste.4. Adhesives commonly used in OEM toothpaste manufacturing include CMC, HEC, carrageenan and mineral gel.The dosage is 0.8-1.5%.Because adhesives swell quickly in water, they are commonly used in OEM toothpaste manufacturing processes.This will disperse the adhesive into the moisturizer and then add it to the solution while stirring to ensure it swells evenly.In the OEM toothpaste manufacturing process, before replacing and using each batch of adhesive, it is necessary to make a sample of the toothpaste, check its consistency and other parameters, and based on the experimental results, determine the dosage of the production formula.